Description
XTH 3000-12,The Xtalent XTH provides a great flexibility of use due to its many functions:bidirectional inverter,battery charger,transfer system and assistance to the source or feed back to the source(Grid feeding).2 auxiliary contacts allow automatic control of a genset,the discoennection of non-priority loads or other programmable functions. These functions can be controlled in a totally automatic way for an optimal management of available energy in hybrid systems,in combination with Vario series solar charge controllers.
1.Compatible with most battery technologies
· like: AGM, GEL, Flooded LA NiCad, NiFE, Aquion, Redox, Lithium.
2.Transfer Switch(UPS、Back up power)
·0 ms transfer time when switching from Inverter to AC input source
·<0.15 ms transfer time when switching from Inverter to AC input source
3.Surge Capacity (inductive load)
·The inverter has a surge capability of 3X its continuous power rating.
·The inverter load can exceed the continuous output power for up to 30 minutes, allowing a power boost without triggering and overload failures.
·There is no need to choose more powerful inverters because of the excess load of a little time, which will greatly reduce the cost.
4.Ac input
·Can access 2 kinds of AC power supply, and the two kinds of AC power supply for programming.
·Compatible with any kind of AC source.
·6 stages battery charging:
·Bulk-Absorption-Floating-Equalization-reduced-floating-periodic absorption
·Solar priority or battery priority can be set.
5.Modular design
·Up to 2 sets in series to increase output power.
·Up to 3 parallel to increase single-phase output power.
·3 sets in parallel can form the three-phase power supply, up to 9 sets in parallel to form the three-phase power supply.
6.Remote monitoring function
·Local monitoring and data acquisition through RCC.
·Monitoring system through mobile APP SmartEss.
·Monitor the system through the Web side.
7.Electronic protection functions
·Deep discharge protection.
·Battery overvoltage shutdown .
·Short circuit protection.
·Overtemperature and overload protection.
·Reverse polarity protection by internal fuse(except XTH3000).
·Acoustic alarm at deep discharge or overheating.
Model | XTH 3000-12 | XTH 5000-24 | XTH 6000-48 | XTH 8000-48 | |
Characterisation of the operating performance | |||||
Nominal battery voltage | 12V | 24V | 48V | 48V | |
Input voltage range | 9.5-17VDC | 19-34VDC | 38-68VDC | 38-68VDC | |
Continuous power | 2500VA | 4500VA | 5000VA | 7000VA | |
Power 30 min. | 3000VA | 5000VA | 6000VA | 8000VA | |
Power 5 sec. | 7.5KVA | 12KVA | 15KVA | 21KVA | |
Max.efficiency | 93% | 94% | 96% | 96% | |
Own consumption stand by | 1.4W | 1.8W | 2.2W | 2.4W | |
Own consumption ON | 14W | 18W | 22W | 30W | |
Acoustic level without ventilation | 40 dB | ||||
Acoustic level with ventilation | 45 dB | ||||
Maximum load | Up to short-circuit | ||||
Maximum asymmetric load | Up to Pcont. | ||||
Load detection (stand-by) | 2 to 25 W | ||||
Cos φ | 0.1-1 | ||||
Output voltage | Pure sine wave 230Vac (±2%)/120Vac(1) | ||||
Output frequency | 45Hz-60Hz(1)±0.05%(crystal controlled) | ||||
Harmonic distortion | <2% | ||||
Overload and short-circuit protection | Automatic disconnection with 3 time restart attempt | ||||
Overheat protection | Warning before shut-off- with automatic restart | ||||
Battery charger | |||||
Charge Characteristic | 6 steps: Bulk-Absorption-Floating-Equalization-reduced floating-periodic absorption Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03 | ||||
Temperature compensation | With BTS-01 or BSP 500/1200 | ||||
Power Factor Correction(PFC) according | EN 61000-3-2 | ||||
Maximum charging current | 160A | 140A | 100A | 120A | |
Input voltage range | 150 to 265Vac/50 to 140Vac(1) | ||||
Input frequency | 45 to 65Hz | ||||
Input current max. (transfer relay)/Output current max. | 50Aac/56Aac | 50Aac/80Aac | |||
Transfer time | <15ms | ||||
Multifunction contacts | 2 independent contacts(potential free 3 points,18Aac/5Adc) | ||||
Dimension hxwxl [mm] | 230×300×500 | ||||
Protection index | IP20 | ||||
Operating temperature range | -20 to 55°℃ | ||||
Relative humidity in operation | 95% without condensation | ||||
Ventilation | Forced from 55°℃ | ||||
Warranty | 5 years | ||||
Weight | 34Kg | 40Kg | 42Kg | 46Kg |
Application
Home Off-Grid & Back-Up Power Solutions
RV Solar power system solutions
Marine Power Solutions
FAQs:Why should I choose your brand?
The technology of our products comes from Europe and is manufactured in China. Choosing us is equivalent to choosing a good and inexpensive product.Our Battery Charger/Inverter start offer in 2019 , till now still hot sale. We improved the quality constantly in the first 2 years even the packing box according to our customers required. And we are assured our quality is perfect. we tested the goods before shipping.
What are the main features of the Bolanmu Battery Charger/Inverter series?
The Bolanmu Battery Charger/Inverter series is a true energy manager, unique and compact, that has 5 main functions. It can be an off-grid inverter, battery charger, current injector, transfer system and provide support to an AC source.
Reviews
There are no reviews yet.