Description
VictorTeam series MPPT solar charge controller has two maximum charging current options of 65 amp and 80 amp, which is suitable for 12, 24, 48V solar system. VT MPPT series has IP54 protection grade, all-aluminum shell efficient heat dissipation，These high quality solar charge controllers offer the highest efficiency and the fastest regulation for similar products on the market. The combination of the VT solar regular and XTS、XTM、XTH results in a highly efficient hybrid solution.
Feature:
Compatible with most battery technologies
·like: AGM, GEL, Flooded LA NiCad, NiFE, Aquion, Redox, Lithium.
4 stage charging, prolong the battery life
·Bulk, Absorption, Float, Equalization
Up to 15 sets can be used in parallel
·5kW per unit and up to 15 units in parallel:75kW
It can achieve synchronization battery management with the XTS, XTM, and XTH battery charger/Inverter
·VT series solar controller and XTS, XTM, XTH can maximize the efficiency of energy use
Remote monitoring function
·Local monitoring and data acquisition through RCC.
·Monitoring system through mobile APP SmartEss.
·Monitor the system through the Web side.
Multiple electronic protection
·Protection against incorrect wiring
·Protection against reverse polarity
High efficiency and low energy consumption
·High conversion efficiency >98%(CEC@Ubat 48V)
·Low self-consumption:<1W in night mode
| Model | VT-65 | ||
| Electrical characteristics PV array side | |||
| At nominal battery voltage | 12V | 24V | 48V |
| Maximum solar power recommended (@STC) | 1000 W | 2000 W | 4000 W |
| Maximum solar open circuit voltage | 75V | 150V | |
| Mavimum solar functional circuit voltage | 75V | 145V | |
| Minimum solar functional circuit voltage | Above battery voltage | ||
| Electrical characteristics battery side | |||
| Maximum output curernt | 65 A | ||
| Nominal battery voltages | Automatic/ manual set to 12, 24 or 48 V | ||
| Operating voltage range | 7-68V | ||
| Performances of the device | |||
| Power conversion effciency (in a 48V typical-system) | >99 % | ||
| Maximum stand-by self-consumption (48V) | 25 mA>1.2 W | ||
| Maximum stand-by self-consumption (24V) | 30 mA>0.8 W | ||
| Maximum stand-by slfconsumption (12V) | 35 mA>0.5 W | ||
| Charging tages | 4 stages: Bulk,Absorption, Float, Equalization | ||
| Battey temperature compensation (available with accessory BTS-01 | -3mV/℃/cell(25℃ ref) default VALUE (adjustable )-8 to mV/℃ | ||
| Electronic protections | |||
| PV reverse polarity | Up to-150V | ||
| Battery reverse polarity | Up to-150V | ||
| Battery overvoltage | Up to 150V | ||
| Over temperature | Protected | ||
| Reverse current at night | Prevented by relays | ||
| Environment | |||
| Operating ambient temperature range | -20 to 55°℃ | ||
| Humidity | 100% | ||
| Ingress protection of endosures | IP54, IEC/EN 60529:2001 | ||
| Mounting location | indoor | ||
| General data | |||
| Waranty | 2 years | ||
| ISO Certification | 9001:2008/14001:2004 | ||
| Weight | 5.2kg | ||
| Dimensions h/w/l [mm] | 120/220/310 | ||
| Parallel operation (separated PV arrays) | Up to 15 devices | ||
| Max wire size | 35 mm2 | ||
| Glands | M 20× 1,5 | ||
| Communication | |||
| Network cabling | Fangpusun communication BUS | ||
| Remote control & Communication | RCC-02/-03, Xcom-232i/Xcom-LAN/Xcom-GSM/Xcom-SMS | ||
| Menu languages | English/ French/ German/ Spanish | ||
| Datalogging | With RCC-02/03, Xcom-232i on SD card:One point every minute | ||
Application
Home Off-Grid & Back-Up Power Solutions
Reviews
There are no reviews yet.