Description
Mate2
The Bolanmu MATE2 is a complete system controller and display for both the Bolanmu FX2000 inverter/charger and MX60 MPPT PV charge controller.It provides a display of the operation as well as allows control and adjustment of the set points.The Bolanmu Mate2 also coordinates the operation of the entire system to maximize performance and to prevent multiple products from conflicting.
A single Bolanmu MATE2 is able to connect to multiple Fx2000inverter/charges,MX60 MPPT PV charge controllers and any other Bolanmu power conversion and control products offered in the future.A maximum of ten Bolanmu products will be able to be connected to a single MATE2 via CAT 5/ether net type cabling with 8 wire RJ45 modular connectors and the Bolanmu HUB communication manager.
The Bolanmu MATE2 includes a 4 line back lit LCD display with 80 alphanumeric characters. This allows multiple measurements to be displayed at the same time and reduces the amount of abbreviations required, simplifying the operation and reducing confusion.All of the programmed set points are stored in permanent memory to eliminate the need to reprogram the system after a shut down or battery replacement.
The Bolanmu MATE2 also includes a built in real time clock and calendar which allows programming of the inverter operation based on the time of day and even day of the week. This can be used to allow the system to work with time-of-day power rates or to limit a generator’s run time to a specific time period of the day or week.
The Bolanmu MATE2 also includes an opto-isolated RS232 port with a DB9 jack for connection to the serial port of a PC computer.
Product features
→ A 4 line backlit LCD display
→ A built in real time clock and calendar
→ An opto-isolated RS232 port with a DB9 jack for connection to the serial port of a PC computer
→ Permanent storage,reprogram the system after a shut down or battery replacement
Display
→Multiple measurements are displayed at the same time and reduces the amount of abbreviations required
Specifications | The MATE 2 |
Interface Display | 4 line 80 character back lit LCD-Alphanumeric with graphic symbols |
Control Keypad | 6 backlit silicone membrane keys- dedicated inverter and AC input keys |
Status Indicators | Two Led Status Indicators:Green=Inverter Yellow=AC Input |
Communication Protocol | Proprietary Bolanmu Multi-drop using an Bolanmu HUB |
Interconnection Cabling | Standard CAT5 network cable with RJ45 modular jack-50 ft included |
PC Computer Interface | Rs232 opto-isolated DB9 jack 9600 baud serial communication |
Microprocessor | 16 MHz low power consumption version |
Setpoint and Data Memory | 32K non-volatile flash RAM |
Clock / Calendar | On-board real time clock with battery backup |
Audible Indicator | 2 KHz Transducer |
Environmental Rating | Indoor Type 1 Optional outdoor Type3 Rtransparent lockable cover |
Dimensions | 5.75″W×4.25″H×2″D 14.6cm×10.8cm×5.08cm |
Shipping Weight | 1Ib-454g |
Warranty | Two years parts and labor Optional Extended Warranty |
Reviews
There are no reviews yet.