FLEXmax60 MPPT

FLEXmax 60 MPPT is a solar charge controller that can adapt to changing climate. FLEXmax MPPT is suitable for 12V, 24V, 36V, 48V and 60V solar systems,the ability to “step-down” a higher PV voltage to charge batteries of a lower voltage, and an innovative MPPT software algorithm that increases your PV array’s power yield by up to 30% The maximum charging current is 60A and 80A. FM MPPT has a built-in cooling fan,Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 40℃. It has a four-row LCD display that displays various states and faults, and is easy to program its many operating parameters. Record the last 128 days of operation data (ampere-hours, watt-hours, floating time, peak watts, amperes, solar array voltage, maximum cell voltage, minimum cell voltage and absorption time, cumulative ampere-hours, production KWH) for review.  

	FLEXmax60 MPPT	FLEXmax80 MPPT
Nominal Battery Voltages	12,24,36,48,or 60 VDC(Single model-selectable via field programming at start-up)	12,24,36,48,or 60 VDC(Single model-selectable via field programming at start-up)
Maximum  Output  Current	60 amps@104°F(40°℃)with adjustable current limit	80amps@104°F(40℃)with  adjustable  current  limit
Maximum  Solar  Array  STC  Nameplate	12 VDC  systems 900 Watts/24 VDC  systems  1800 Watts 48 VDC  systems 3600 Watts/60 VDC Systems 4500 Watts	12 VDC  systems  1250 Watts/24 VDC  systems 2500 Watts 48 VDC systems 5000 Watts /60 VDC Systems 7500 Watts
NEC  Recommended  Solar  Array  STC Nameplate	12 VDC systems 750 Watts /24 VDC systems 1500 Watts 48 VDC systems 3000 Watts/60 VDC Systems 3750 Watts	12 VDC systems 1000 Watts /24 VDC systems 2000 Watts 48 VDC  systems 4000 Watts/60 VDC Systems 5000 Watts
PV Open Circuit Voltage(VOC)	150 VDC absolute maximum coldest conditions/145 VDC start-up and  operating  maximum	150 VDC absolute maximum coldest conditions/145 VDC start-up and  operating  maximum
Standby   Power   Consumption	Less than 1 Watt typical	Less than 1 Watt typical
Power Conversion Efficiency	98.1%@60Amps  in  at  48  VDC  System  voltage-Typical	97.5%@80Amps  in  at  48  VDC  System  voltage-Typical
Charging  Regulation	Five Stages:Bulk, Absorption, Float, Silent and Equalization	Five Stages: Bulk,Absorption, Float, Silent and Equalization
Voltage Regulation Set points	10 to 80 VDC user adjustable with password protection	10 to 80 VDC user adjustable with password protection
Equalization Charging	Programmable Voltage Setpoint and Duration -Automatic Termination when completed	Programmable Voltage Setpoint and Duration -Automatic Termination when completed
Battery  Temperature  Compensation	Automatic with optional RTS installed/5.0 mV per°C per 2V battery cell	Automatic with optional RTS installed/5.0 mV perC per 2V battery c
Voltage Step-Down Capability	Can charge a lower voltage battery from a higher voltage PV array      -Max  150  VDC  input	Can charge a lower voltage battery from a higher voltage PV array      -Max  150  VDC  input
Programmable Auxilary Control Output	12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)	12 VDC output signal which can be programmed for diferent control applications (Maximum of 0.2 amps DC)
Status Display	3.1″(8 cm) backlit LCD screen-4 lines with 80 alphanumeric characters total	3.1″(8 cm) backlit LCD screen-4 lines with 80 alphanumeric characte total
Remote Display and Controller	Optional Mate or Mate2 with RS232 Serial Communications Port	Optional Mate or Mate2 with RS232 Serial Communications Port
Network  Cabeling	Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)	Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data  Logging	Last 128 days of Operation -Amp Hours, Watt Hours, Time in Float,Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours,and kW Hours of production	Last 128 days of Operation -Amp Hours, Watt Hours, Time in Float,Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours,and kW Hours of production
Hydro Turbine Applications	Consult factory for approved Turbines	Consult factory for approved Turbines
Positive Ground Applications	Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)	Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
Operating  Temperature  Range	Minimum -40°to maximum 60°C(Power capacity of the controller is automatically derated when operated above 40°C)	Minimum -40°to maximum 60°C(Power capacity of the controller is automatically derated when operated above 40°C)
Environmental  Rating	Indoor Type 1	Indoor Type 1
Conduit   Knockouts	One 1″(35mm)on the back; One 1″(35mm)on the left side; Two  1″(35mm)on  the  bottom	One 1″(35mm)on the back; One 1″(35mm)on the left side; Two  1″(35mm)on  the  bottom
Weight  -Unit	5.3  kg	5.6  kg
-Shipping	6  kg	6.3  kg
Dimensions – Unit	40×14×10     cm	44×14×10    cm
-Shipping	46×30×20     cm	51×24×21.5  cm
Options	Remote  Temperature  Sensor(RTS),  HUB  4,HUB  10,MATE,MATE  2	Remote  Temperature  Sensor(RTS),  HUB  4,HUB  10,  MATE,  MATE  2
Menu    Languages	English & Spanish	English & Spanish

 

Application

Home Off-Grid & Back-Up Power Solutions RV Solar power system solutions Marine Power Solutions