Description
The YTH8000 Series Residential Energy Storage System (RESS) is an innovative technology that helps households achieve energy independence, reduce their carbon footprint, and save money on their electricity bills.The YTH8000 series can be equipped with 10kWh,15kWh or 20kWh LiFePo4 batteries，hybrid inverters compatible with any type of AC power and easily retrofitted into existing solar PV installations. The system has 2 auxiliary contacts that can be set up to store energy generated during the day, And discharge it at night when domestic demand peaks. We expect the battery pack to last about 15 years with more than 3,000 cycles.此外，In addition, the YTH hybrid inverter can now be installed as a pure solar inverter, and the battery can be easily expanded or renewed at a later date.
Transfer Switch(UPS、Back up power)
·0 ms transfer time when switching from Inverter to AC input source
·＜0.15 ms transfer time when switching from Inverter to AC input source
Surge Capacity (inductive load)
·The inverter has a surge capability of 3X its continuous power rating.
·The inverter load can exceed the continuous output power for up to 30 minutes, allowing a power boost without triggering and overload failures.
·There is no need to choose more powerful inverters because of the excess load of a little time, which will greatly reduce the cost.
Ac input
·Can access 2 kinds of AC power supply, and the two kinds of AC power supply for programming.
·Compatible with any kind of AC source.
·6 stages battery charging：
·Bulk-Absorption-Floating-Equalization-reduced-floating-periodic absorption
·Solar priority or battery priority can be set.
Remote monitoring function
·Local monitoring and data acquisition through RCC.
·Monitoring system through mobile APP SmartEss.
·Monitor the system through the Web side.
Electronic protection functions
·Deep discharge protection.
·Battery overvoltage shutdown .
·Short circuit protection.
·Overtemperature and overload protection.
·Reverse polarity protection by internal fuse(except XTH3000).
·Acoustic alarm at deep discharge or overheating.
| Bolanmu Energy Storage System with Hybrid Inverter | ||||
|---|---|---|---|---|
| Ltem | Model | YTH-8000+10KWh | YTH-8000+15KWh | YTH-8000+20KWh |
| Battery Module | Voltage | 51.2V | ||
| Battery capacity | 200Ah | 300Ah | 400Ah | |
| Charge voltage | 58.4V | |||
| Discharge cut-off voltage | 40.0V | |||
| Max charge current | 200A | 300A | 400A | |
| Max discharge current | 200A | 300A | 400A | |
| Max peak current | 300A | 400A | 500A | |
| Communication method | RS485/CAN | |||
| Hybrid Inverter | Continuous Power | 7000VA | ||
| Power 30 min. | 8000VA | |||
| Power 5 sec. | 21KVA | |||
| Own consumption stand by | 2.4W | |||
| Output Voltage | Pure sine wave 230Vac(±2%)/120Vac(1) | |||
| Output Frequency | 45Hz-60Hz(1)±0.05% | |||
| Hamonic distortion | <2% | |||
| Input voltage range(AC) | 150 – 265Vac/50 – 140Vac(1) | |||
| Input Frequency | 45 – 65Hz | |||
| Max charge current | 120A | |||
| Transfer time | <15 ms | |||
| Acoustic level | 45 dB | |||
| Maximum load | Up to short-circuit | |||
| Load detection (stand-by) | 2 to 25 W | |||
| Cos φ | 0.1-1 | |||
| Overload and short-circuit protection | Automatic disconnection with 3 time restart attempt | |||
| Overheat protection | Warning before shut-off-with automatic restart | |||
| Parameter | Material/Colour | Metal/White | ||
| Size | 565*460*610mm | 565*460*790mm | 565*460*970mm | |
| Weight | 138KG | 184KG | 230KG | |
| Temperture | Charge:0℃-50℃ Discharge:-15℃-50℃ |
|||
Reviews
There are no reviews yet.